All of Us wrote: > I was having problems with "hot foot" even though the heater valve was > completely shut off. The reason was that hot air from under the front end > was blowing up through the hole that the rod attached to the gas pedal > passes through. I ended up putting a second piece of carpeting with a > smaller hole in it under the stock carpet. This cut down the amount of hot > air pushed through the hole and solved the problem. Bits of bicycle inner tube work fairly well for this, too. I used some to make seals for the clutch and brake pushrods on my '75. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.