At 02:12 PM 7/17/2003, you wrote: >I have a transmission that the gear box is fine in but the hydrolics - >shifts slips and doesn't work. > >Can I bust these two in half and use the good halves and make a good >automatic?
Yes you can. That should be pretty easy. There is a sort of complex measurement in Bentley that determines the thickness of the shim(s) that go between the 2, on the shaft. You may end up needing a different shim. Otherwise, should be pretty easy. Might as well do some gaskets while you have it out and apart. I got my rebuild kit from bulkpart. I guess it is for multiple vehicles because I had many parts that were not used. Really, I bet I used less than half of what came in the kit. And be warned, it is just a bunch of parts mixed up in no particular order, with no instructions or anything. Edward |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.