At 08:53 AM 7/17/03 -0700, you wrote: >Mark, > So this brings up an interesting question. >Which speeds in the two speed matches which two of the >three speed in the tree speed and why? Power is supplied at all times to the thermo-switch in the radiator. It has 3 possible positions. When cold it is an open circuit, when hot it closes the circuit to one set of coils (low speed) in the fan motor. When really hot it closes the second circuit (While keeping the first circuit closed). and that energizes the relay which supplies current to the second set of coils (High speed) in the fan motor and the fan runs fast with both sets going. The AC system also has control over the relay, and will close it to supply current to the High Speed circuit of the fan regardless of what the thermo-switch is doing. So if the engine's cool enough the fan will be running at a medium speed that the non-AC vans never run at. If the coolant's hot enough to close the low speed coil, the fan will of course run at high speed with the relay closed, because both sets of coils are supplied. If I have mis-read the wiring diagram, Flame away people. I have the asbestos underpants on. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.