Date: Tue, 15 Jul 2003 18:07:33 +0000
Reply-To: fortinoj@SPEAKEASY.NET
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Joseph Fortino <fortinoj@SPEAKEASY.NET>
Subject: Re: 1.9 Cooling System
Content-Type: text/plain; charset="us-ascii"
guys,
do you know that their is a place in Portland OR it is Always V-dub (503)235-2757 they have a H piece re-made. just let them know and see if they are putting these out still.
Joe
> -----Original Message-----
> From: VWNut Hawk [mailto:vwnut@HAWKCOMPUTING.COM]
> Sent: Tuesday, July 15, 2003 05:51 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: 1.9 Cooling System "H" Piece
>
> It has a strange flow channel doesn't it. There is a screw used to
> bleed air out?
> It's not just a sideways H and small fitting out? I have a broken one
> to be sure but
> it didn't look that easy.
>
> >>> "Douglas L. Urner" <dlu@PATROSA.CANISHE.COM> 7/15/2003 12:11:15 PM
> >>>
> Any reason not to make this part up from some copper pipe? Seems like
> it wouldn't be too hard to solder some up if there was a pipe size
> that
> was close enough -- or else use some hose barbs.
>
> Doug
>
> >Just FYI, we got this piece from a new vendor in brass. It looks
> really
> >well made and I am going to have a picture up on my site soon. The
> only
> >down side is the price. $89.95. However if it is a choice between
> that and
> >taking your van off the road, this is a small price to pay. When I
> get the
> >picture up it will be under part number 025121438 in the webstore.
> >Hopefully Jim will get this piece made in plastic and affordable again
> soon,
> >but until then if you really need to get this part, give me a call.
> >
> >Thanks,
> >Ken Wilford
> >John 3:16
> >http://www.vanagain.com
> >http://www.strictlyvwauctions.com
> >Phone: (856)-327-4936
> >Fax: (856)-327-2242
> >
> >-----Original Message-----
> >From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On
> Behalf
> >Of Jim
> >Sent: Monday, July 14, 2003 10:49 AM
> >To: vanagon@GERRY.VANAGON.COM
> >Subject: 1.9 Cooling System "H" Piece
> >
> >
> >Does anyone have a picture of part number 025 121 438? The H piece
> that
> >goes between the engine and the header tank. I'm chatting with a
> >plastic fabricator about reproducing them and a pic I ain't got.
> >
> >Thx.
> >
> >Jim
>
|