Date:         Thu, 17 Jul 2003 18:16:14 -0400
Reply-To:     mrvolkswagen@HOTMAIL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris S <mrvolkswagen@HOTMAIL.COM>
Subject:      Re: Would these wheels fit?
Comments: To: JordanVw@AOL.COM
Content-Type: text/plain; charset="iso-8859-1"

> they will fit,  they are a DIRECT bolt on for the '93 up Eurovan (no
> machining, no spacers)  any they will fit the Vanagon if you machine the
centers to
> 2.5" ID .  you may or may not have to use spacers on the fronts ,
depending on
> the offset, and if your van is a syncro or not.  i have run Audi A4 wheels
on a
> vanagon before.  i machined the centers and used another type of
centercap.

Audi A6 wheels are ET45.  15 mm spacers would be needed then.

Chris S.
'85 Westy
www.knology.net/~vw/
http://groups.yahoo.com/group/wolfsburg_campers

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.