Date:         Fri, 18 Jul 2003 04:36:56 -0400
Reply-To:     Vanagon Man <vgonman@MSN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Vanagon Man <vgonman@MSN.COM>
Subject:      Re: fuel injector hoses
Comments: To: David and Shirin <daveshirin@ENERGYUNITED.NET>
Content-Type: text/plain; charset="iso-8859-1"

DO NOT CUT THRU THE GOLD FERRULE!  You can, but then you have to clamp
there.  Cut the hose out of the ferrule and push new piece in.  It is
desig=ned to stay on....Very nice hose barb is on the end of the injector.
That is if you are using the correct size hose as replacement.

Adam P
81  Westy "The Brick "
70 Single Cab "Whitey"
74 Beetle "Ol Yeller"
73 Transporter (STILL at paint shop)
1988 Vanagon Wolfsburg
1976 Transporter (New CA bus)
1974 412 "Goldmember"
Used Vanagon Parts for sale (mostly aircooled)
----- Original Message -----
From: "David and Shirin" <daveshirin@ENERGYUNITED.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, July 17, 2003 3:40 PM
Subject: Re: fuel injector hoses


Sorry just found it in the archive, I need to cut through the gold Ferrule
david

  ----- Original Message -----
  From: David and Shirin
  To: vanagon list
  Sent: Thursday, July 17, 2003 3:36 PM
  Subject: fuel injector hoses


     Ok how do I remove the hoses from my fuel injectors, all four injectors
are new as of a few years ago, but I want to replace the short hose from the
injector to the fuel rail.  The short hoses appear to be crimped onto the
fuel injecors.  There is no adjustable clamp like is found on every other
junction in the fuel system, just the little gold ring that the fuel hose
terminates under.  Do I just need to pull much harder on the hose, or does
this gold ring need to be cut off and replaced with a clamp.
  David



  ---
  Outgoing mail is certified Virus Free.
  Checked by AVG anti-virus system (http://www.grisoft.com).
  Version: 6.0.493 / Virus Database: 292 - Release Date: 6/25/2003