Date: Tue, 15 Jul 2003 13:12:33 -0500
Reply-To: VWNut Hawk <vwnut@HAWKCOMPUTING.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: VWNut Hawk <vwnut@HAWKCOMPUTING.COM>
Subject: Re: 1.9 Cooling System "H" Piece
Content-Type: text/plain; charset=US-ASCII
I'm always half reading stuff. Sorry.
>>> "Jay L Snyder" <Jay.L.Snyder@usa.dupont.com> 7/15/2003 1:06:02 PM
>>>
I thought we were talking about the piece at the tank? (Not at the
firewall)
VWNut Hawk <vwnut@HAWKCOMPUTING.COM>@gerry.vanagon.com> on 07/15/2003
01:51:32 PM
Please respond to VWNut Hawk <vwnut@HAWKCOMPUTING.COM>
Sent by: Vanagon Mailing List <vanagon@gerry.vanagon.com>
To: vanagon@GERRY.VANAGON.COM
cc:
Subject: Re: 1.9 Cooling System "H" Piece
It has a strange flow channel doesn't it. There is a screw used to
bleed air out?
It's not just a sideways H and small fitting out? I have a broken one
to be sure but
it didn't look that easy.
>>> "Douglas L. Urner" <dlu@PATROSA.CANISHE.COM> 7/15/2003 12:11:15 PM
>>>
Any reason not to make this part up from some copper pipe? Seems like
it wouldn't be too hard to solder some up if there was a pipe size
that
was close enough -- or else use some hose barbs.
Doug
>Just FYI, we got this piece from a new vendor in brass. It looks
really
>well made and I am going to have a picture up on my site soon. The
only
>down side is the price. $89.95. However if it is a choice between
that and
>taking your van off the road, this is a small price to pay. When I
get the
>picture up it will be under part number 025121438 in the webstore.
>Hopefully Jim will get this piece made in plastic and affordable
again
soon,
>but until then if you really need to get this part, give me a call.
>
>Thanks,
>Ken Wilford
>John 3:16
>http://www.vanagain.com
>http://www.strictlyvwauctions.com
>Phone: (856)-327-4936
>Fax: (856)-327-2242
>
>-----Original Message-----
>From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On
Behalf
>Of Jim
>Sent: Monday, July 14, 2003 10:49 AM
>To: vanagon@GERRY.VANAGON.COM
>Subject: 1.9 Cooling System "H" Piece
>
>
>Does anyone have a picture of part number 025 121 438? The H piece
that
>goes between the engine and the header tank. I'm chatting with a
>plastic fabricator about reproducing them and a pic I ain't got.
>
>Thx.
>
>Jim
This communication is for use by the intended recipient and contains
information that may be privileged, confidential or copyrighted under
applicable law. If you are not the intended recipient, you are hereby
formally notified that any use, copying or distribution of this
e-mail,
in whole or in part, is strictly prohibited. Please notify the sender
by return e-mail and delete this e-mail from your system. Unless
explicitly and conspicuously designated as "E-Contract Intended",
this e-mail does not constitute a contract offer, a contract
amendment,
or an acceptance of a contract offer. This e-mail does not constitute
a consent to the use of sender's contact information for direct
marketing
purposes or for transfers of data to third parties.
Francais Deutsch Italiano Espanol Portugues Japanese Chinese
Korean
http://www.DuPont.com/corp/email_disclaimer.html