I bought a made by VW wiring harness that goes inbetween the AFM and the connector that connects to the wiring harness. Before I put it in, the van was running great. I put in the wiring harness, started her up and it ran like crap. I can rev it up and then it just cuts out and dies, revs up cuts out and dies, etc. I took the harness off and it ran crappy for a few more minutes then started to run normal again. Is there some sort of adjustment that needs to be made when installing the Vanagon syndrome harness? Will the harness make things worse if the van is not already exhibiting symptoms of vanagon syndrom? I was attempting to install the harness as preventive maintence in preparation for a cross country trip. Thanks very much for any help, Andrew Fox 86 Westy 2.1 L Auto |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.