I'd be thankful they fit at all. I bought a couple upper control arm/wishbone bushings from an on line vanavendor who swore up+down they were for 84' vanagon.I had a machine shop press them in the wishbone. The bushings have never seated right and i still have some play when pulling the wheel forward and back...no matter HOW tight the spindle is(tested while on jacks) i measured the new bushing and old bushing and the new ones are 1/8" shorter....mysterious!
Phil 84' westy tiico'd
--- Steve Delanty <laurasdog@WEIRDSTUFFWEMAKE.COM> wrote: > A couple months ago I did a ton of front suspension > work on the Westy. It drives and handles much > better, > but now I have this terrible rubbery squeek/groan > that comes from the upper control arm bushings. > It's REALLY obnoxious, and both sides do it when > there's any front suspension activity. > I tried squirting a bit of silicone lube on the > bushings, > but no change.... > > Has anyone else had this problem? What to do? > Is there something inferior about some brands of > bushings? I got 'em from one of our FOLV. > (Friendly On Line Vendor) > Did I do something wrong during assembly? > > Does anyone have any good suggestions besides > pressing them out and starting over again with > a new set? > > It's driving me absolutely CRAaAZzyyY !! > > Thanks for any good advice before I tear my hair > out... > Steve > > '86 Westy "Escape Pod"
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.