See my post yesterday regarding the one lone wire. Do NOT ground this wire or the fridge will never stay lit. Tape it off so it can't touch metal. Mark
Randy Charrette wrote: > > 1) My fridge is definetly an older model. No lights, ect during operation. > Just the pilot hole at the inside bottom left. On the front from the left > there is the pump, then there is a push in button with a hand symbol (index > finger pointing). This button on the inside metal valve part has a black > wire connected to it. On the other end of the wire is a spade connector > which is just hanging free. Any ideas what this goes to?? Should it have > power or ground? I suspect ground, but that goes against the other wires in > the setup..... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.