Date:         Wed, 30 Jul 2003 23:22:25 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: I want to kill my control arm bushings.......Excentric
              Washers ???
Comments: To: Trvlr2001@AOL.COM
In-Reply-To:  <7a.450c3a4f.2c595f19@aol.com>
Content-type: text/plain; charset=us-ascii

No, but for some reason some bushings and or arms are different. Another
possibility is that the originals were not shimmed right in the first
place. I always get a set of the larger washers when planning to do
these and they are usually needed.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of John C...
Sent: Wednesday, July 30, 2003 1:49 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: I want to kill my control arm bushings.......Excentric
Washers ???

> >The eccentric bushings are available in three different thicknesses.
it is
> common >for thicker washer to be required with replacement bushings.
This is
> important >for the Syncros as the cast arms do not bend to provide
> conformance.
>
Hi All,
Now...I am confused??
Do the bushings come in three different sizes,
or is it the washers that come in three different thickness'?
thanks,
JC...