Date: Thu, 7 Aug 2003 11:51:54 EDT
Reply-To: Oxroad@AOL.COM
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jeff Oxroad <Oxroad@AOL.COM>
Subject: Re: Brown Window Handles??
Content-Type: text/plain; charset="US-ASCII"
I don't know about Bus Depots spacers, but I bought spacers from a place
called Autotech.com and I think they go for about $30. For some reason--I assume
limited production--they're pricely little devils.
The spacers I got are black and made of plastic. As a result the first set of
all plastic spacers, when attached to the stock window crank which has metal
spline recievers, eventually chewed through the plastic. The Autotech spacers
recommend crazy glue or similar glue to glue the plastic to the window cranks
and then install them. Problem is the metal on the crank didn't really bond
all that well with the plastic spacer.
On the next purchase of the $30 spacers I installed them with VW Fox window
cranks from a junk yard. The Fox cranks are all plastic and when glued to the
the spacers have functioned fine for about 3 years with no separation. The Fox
cranks look better then the rather cheap looking stock cranks in my opinion.
The Fox cranks were available in brown as I've seen them in wrecking yards on
occassion-I don't know if the VW dealer can still get new brown cranks as I've
never looked. Again these handles are all plastic. Catch is the Auto tech
spacers are only available in black as far as I know. I'm not familiar with Ron's
spacers personally, but like I said the $20 sounds better than the $30 plus
shipping I paid.
Without the spacers my cranks would not clear the door mounted speakers, so a
necessity for me.
Good luck,
Jeff,
83.5 Westy
LA,CA
In a message dated 8/7/2003 10:07:20 AM EST, doug.alcock@HEWITT.COM writes:
<< I need new window winders for my 84 Westy. The Bus Depot only
sells black and I'd like to get brown ones to match the original. Anyone
have some or know of a source for new? And while we're on the subject ----
has anyone bought the "window handle spacers from Ron? I was going to
pickup a set to go with my new handles --- but at $21.95 for two spacers
I'd like to know what makes them worth that much money --- considering
that the handles are only a couple of bucks each. >>