Date:         Thu, 31 Jul 2003 22:02:40 -0700
Reply-To:     Damon Campbell <damoncampbellvw@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Damon Campbell <damoncampbellvw@YAHOO.COM>
Subject:      Re: split thrust shim?
Comments: To: Dennis Haynes <dhaynes@optonline.net>
In-Reply-To:  <000e01c357da$c44a8150$6400a8c0@masterpc>
Content-Type: text/plain; charset=us-ascii

Thanks for the reply, Dennis.

It was indeed the larger of the three shims that seems
to have been cut by the smaller of the shims.  I'll
see if i can get a replacement just for that one.  The
other shims seemed fine.

Again, thank you for the speedy reply,

-damon

--- Dennis Haynes <dhaynes@optonline.net> wrote:
> The shim should not have been reused. They were
> obviously too lazy to
> wait for replacements. The shim may not have been
> damaged from incorrect
> assembly. I have frequently seen these wear out on
> the 2.1L engines.
> There are actually 2 different types of shims used
> here. One large OD
> that is only available in one thickness. This one
> goes against the
> thrust bearing. The other style is smaller in OD and
> is available in a
> number of thicknesses to set the final end play.
>
> Dennis
>
> -----Original Message-----
> From: Vanagon Mailing List
> [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
> Of Damon Campbell
> Sent: Thursday, July 31, 2003 10:38 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: split thrust shim?
>
> I went to a semi-local repair shop to have them set
> the end-play of my crank.  The only problem is that
> one of the shims was split due to a previous engine
> mis-assembly of the outer thrust washer.  I just
> found
> out that they re-used that shim.
> The shim is split about 1.5" around 1/3 of the way
> in
> from the outermost edge.  It doesn't lie flat, and
> that split is bent over by a couple material
> thicknesses.
>
> Is this a part that needs to be replaced?  The shop
> specializes is vw busses, and i don't, but this
> seems
> wrong to me.
>
> Any input would be appreciated.
>
> Thanks,
> -Damon
>
> =====
> '84 Westy (Sparky)
> '65 Kharma Ghia (Dharma)
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> http://sitebuilder.yahoo.com
>
>


=====
'84 Westy (Sparky)
'65 Kharma Ghia (Dharma)

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com