Date:         Fri, 1 Aug 2003 18:30:03 -0700
Reply-To:     "Phil S." <napszeerf@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Phil S." <napszeerf@YAHOO.COM>
Subject:      Re: ADDCO Rear Swaybar
In-Reply-To:  <5F5688EC.2633BE66.02AADA65@aol.com>
Content-Type: text/plain; charset=us-ascii

Did you use the big Addco bolts that attatch the front
swaybar to the end-links? Mine have never fit
right......just too much play, like 1/4" gap. i think
the stock westy swaybar is stout and is just as good.

Phil 84' Westy Tiico


--- Robert Lilley <Wolfvan88@AOL.COM> wrote:
> I have the 1" front and the 7/8" rear swaybars.   I
> drove with the front for a while and the rear swayed
> a bit.  I put the rear bar on and went driving on
> some mountain roads.  It was from Messa AZ to the
> Grand Canyon.  I was able to take the curves at
> 75~80 with little sway.  Adding the rear helped to
> balance the rear and keep it from leaning in the
> curves.
>
> Putting them on was not too difficult.  If you want
> some pics I can send them to you.
>
> There will be 6 holes to drill. It should take about
> a couple of hours.  Get some paint to paint the
> drilled holes to prevent rusting.
>
> Robert


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com