The parking brake handle was improved several ways during the 1985 model year. The improved one is longer for better pulling leverage and is shaped for a more comfortable fit in your hand. The biggest improvement was that they added more and finer teeth to the ratcheting part of the mechanism. This makes it easier to pull it to a tighter setting as it does not have to move as far between clicks. The newer lever can be easily installed in place of the early type but the adjusting cable nut must be slackened about an inch first. There is another possibility for poor parking brake performance. If someone has misadjusted the cable then the small lever inside the brake drum can bottom out on a metal surface BEFORE the shoes are pushed into the drum. When this happens the brake won't hold the vehicle no matter how hard the handbrake lever is pulled. This is a common problem. It is often due to a non-working self adjusting mechanism in the rear brakes. As the brake shoes wear the self adjuster is supposed to compensate. When it does not, the parking brake will get looser and someone may decide to simply tighten the cable nut to try to improve the parking brake. This is a bad thing to do as it does not fix the true problem but only masks it for a while. The Bentley says to loosen the parking cable nut as one of the first steps in repairing the rear brakes. If this is not done, the result will eventually be a non-working parking brake. Once the rear brakes are repaired and everything is in spec THEN you tighten up the cable to adjust the parking brake. Driveway hacks screw this up all the time. Mark Zoran Mladen wrote: > > Hey folks, > > I am having a strange problem on my 84 GL. The > handbrake doesn't work very well. On my late model > Vanagon, as you pull the handbrake, you feel the > tension build as you pull the handbrake higher. > > On my 84, it seems like there is no tension, and then > it gets very hard to pull all of a sudden. The brakes > only hold marginally. > > I have removed both rear drums and watched the > mechnaisms work as someone else pulled the handbrake. > I have replaced both handbrake cables to no avail. I > also replaced both rear drums with new drums and > installed new rear brakes. I have tried adjustment as > well - all that does is move the point at which the > brake goes from pulling easy to pulling hard. > > I am stumped. Any thoughts on this? Anyone else > experiencing this? > > Z > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site design software > http://sitebuilder.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.