In a message dated 8/21/2003 10:17:08 AM Pacific Daylight Time, pooncerelli@HOTMAIL.COM writes: > Here is the first of many questions regarding my new project. What is the > easiest way to remove the power mirrors without cutting the wires. It seems > that there is a mount inside the door that is blocking the wire connectors > from coming through. do i remove this? or do I just have to cut the wires and > then rebuild the connectors? By the way this is from a 87 wolfsburg. Jason, If you look at the connectors, you will find that the spade ends can be slipped out of the plastic housing with a small screw driver or pry tool. Once you slip them out of the housing, they can be pulled through the hole in the door. Don't be tempted to cut the wires. BenT <A HREF="http://members.aol.com/bentbtstr8/myhomepage/">Vanagon Cafe</A> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.