Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2003, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 21 Aug 2003 11:21:09 -0700
Reply-To:     mark drillock <drillock@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mark drillock <drillock@EARTHLINK.NET>
Subject:      Re: It Begins!!!
Comments: To: Jason Willenbrock <pooncerelli@HOTMAIL.COM>
Content-Type: text/plain; charset=us-ascii

You can be a butcher and cut the wires or you can be a pro and release the metal pins unharmed from the plastic connector body. Do this with a stiff metal tool such as a paper clip. Mark the locations before removing the pins. There is a tiny metal tab that locks each pin in it's hole in the connector body. Push the tab flat and pull the wire and pin out.

Mark

Jason Willenbrock wrote: > > Hey All, > Here is the first of many questions regarding my new project. What is > the easiest way to remove the power mirrors without cutting the > wires. It seems that there is a mount inside the door that is > blocking the wire connectors from coming through. do i remove this? > or do I just have to cut the wires and then rebuild the connectors? > By the way this is from a 87 wolfsburg. > thanks > Jason >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.