Probably depends on the tank - on the one I just took out of my 84, original as far as I know, the outlet and return were the same. On the one I bought, that was from an 85, as far as i know, the outlet was bigger than the return - the outlet was the same size as the fuel pump inlet, which meant I had to take out the square plastic fuel filter. Is there a fuel filter that will work in this setup? i.e., has the larger diameter inlet AND outlet? The one I removed had a small inlet and large outlet. cheers, Jeff ----- Original Message ----- From: "Shawn Wright" <swright@ZUIKO.SLS.BC.CA> > I'm thinking of trying a swap between fuel outlet and returns on my '88 fuel > tank, as all signs are pointing toward crud in the tank. Can someone tell > me the correct size hose from the outlet to the pump? Can I use the same > hose from the return fitting to the pump also? I seem to recall it might have > been smaller. > > Thanks. > -- > Shawn Wright |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.