why does the temp sensor not allow the van to start? what i hear is this part fails alot, my trouble of no start and stalling as now pointed me in this direction, but my plugs were fouled out and a dirty fuel filter have been replaced does this get send a signal from the ECU to the injectors. hoping my imjectors are ok and ECU lives on :) at this point my fuel pump is pumping good and the gas tank is ok at this point, I also put in new plug wires since the old ones were fired. ohh the van would only have troubles after heating up so I was thinking it was the temp sensor at one point, but waited to long and the van just died not starting and maybe flooding the plugs?? any ideas? thanks much Joe |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.