From time to time I get lazy and just add distilled water to the back. Light will cycle on unti coolant mixes. Try removing and refreshing coolant in the overflow tank. gary Date: Fri, 22 Aug 2003 09:53:03 -0500 From: Larry Alofs <lalofs@RCN.COM> Subject: Re: flashing coolant light wzup? There is very little that can go wrong with the coolant level sensor. It is simply a pair of metal prongs that project into the coolant. The electronic circuitry it is attached to is annoyingly complex and perhaps inhabited by gremlins. Might help to take the sensor out and clean it off. Be sure you don't have a big air bubble in that tank. For a few weeks about a year ago the light on my 91 would flash for a minute or so after startup. Then it cured itself. Larry A.
Spencer Allen wrote: > The coolant light in my 85 Westy is flashing long after start up and only > goes out after the engine has warmed up. The coolant level is OK. Could this be > just a faulty coolant sensor or something worse? Any ideas appreciated. Thanks > Spencer
__________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.