Date:         Mon, 25 Aug 2003 03:39:05 +0000
Reply-To:     fortinoj@SPEAKEASY.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joseph Fortino <fortinoj@SPEAKEASY.NET>
Subject:      checking injectors for ohms.
Content-Type: text/plain; charset="utf-8"

ok this is the last question before i try and locate an ECU, seems
i get the reading of .017 on each injector, btw this is on off the injector
leads on the injector itself. I have the meter set at 2k, this normal.

Thanks for everyones great help over this weekend, it made a big diffrence
on me getting this far sure the benlty is good but live info is really good.

whats better new or use ECU??

Joe

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.