Date:         Mon, 25 Aug 2003 09:03:09 -0700
Reply-To:     Malcolm Stebbins <mwstebbins@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Malcolm Stebbins <mwstebbins@YAHOO.COM>
Subject:      Re: Speedo questions
Comments: To: Patrick Bryson <pbryson@EXTREMEZONE.COM>
In-Reply-To:  <BB6F77C3.5DB0%pbryson@extremezone.com>
Content-Type: text/plain; charset=us-ascii

--- Patrick Bryson <pbryson@EXTREMEZONE.COM> wrote:
> My odometer quit counting.  Speedo part works fine.

Mine had the same problem.  If you're lucky, it is
just the pin (around which the #s roll) came out of
the end hole.  If the odo #s look as though they have
fallen back & down a bit, that is your problem.  This
you can fix by pushing the pin in from the other end.
I did a temp fix that lasted about 2 years by
super-glueing a stopper (no glue on the pin please) on
the end of the pin hole so that it could not come out.


After 2 years and lot of fiddling it finally broke
beyond my ability.  So I sent it to
http://www.speedometer.com/ and for $70(US) plus
shipping both ways they fixed, calibrated and
generally R&R-ed it.  I have yet to recieve it back so
I can't tell you how/if it works.  They had a bit of
trouble calibrating a KPH speedo, but I think I got
them straightened out.  Malcolm


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com