Date:         Mon, 25 Aug 2003 04:43:34 -0500
Reply-To:     Budd Premack <bpremack@MN.RR.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Budd Premack <bpremack@MN.RR.COM>
Subject:      Digital Clocks: 12/24 Hours
Content-Type: text/plain; charset="iso-8859-1"

How do you shift the digital dash clock from 24 hour mode to 12 hour mode?  It has been suggested that if the proper portion of the clock circuitry is cut (by an exacto knife, for example)
that will shift the clock to 24 hour mode.  It can be reset to 12 hour mode by a small drop of appropriately placed solder to rejoin the cut circuit.

Does anyone have the definitive answer to this?


Budd Premack
86 Syncro, 88 Wolfsburg
Land of Sky-Blue Waters
Minneapolis, MN

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.