Date:         Sat, 30 Aug 2003 16:34:33 -0400
Reply-To:     lauterba <lauterba@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         lauterba <lauterba@BELLSOUTH.NET>
Subject:      Fuel line??
Content-Type: text/plain; charset="iso-8859-1"

Most of the line between the fuel pump and the bulkhead fitting on the engine compartment is hard plastic.  The connecting rubber hose between the fuel pump and the hard plastic needed replacement when I put the new fuel pump in.  I used two screw clamps to hold the new rubber to the hard plastic.  Is this enough given that the hard plastic is not flared and there is no ferrule?

John Lauterbach
Macon, GA
'84 7-passenger

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.