Date:         Thu, 28 Aug 2003 21:19:50 -1000
Reply-To:     Grungy <grungy@MINDLESS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Grungy <grungy@MINDLESS.COM>
Subject:      Re: lower cooling hose thingy...
In-Reply-To:  <20030825040436.7C23D7C2AC@spf8.us4.outblaze.com>
Content-Type: text/plain; charset="us-ascii" ; format="flowed"

>From:    Grungy <grungy@MINDLESS.COM>
>Subject: lower cooling hose thingy...
>
>...there
>was a nylon (maybe) o-ring fitting thing inside of the straight part
>of the hose... After pulling the hose off the back I found it inside of the
>hose.
>
>What is this part?
>It doesn't look like a classic o-ring.
>______________________
>\                    /
>  \__________________/
>
>The angle is exaggerated.
>It has a lot of rusty fibrous stuff on the larger-diameter part of it.

As it turns out this is actually the end of the solid coolant line.
The inner part of the tube is metal and there is a nylon exterior -
this is the end of that exterior part, torn off completely.

The other coolant line still has the end intact, kind of wrapping
around the metal part.  I suppose that I could replace this line or
just try to get the hose to seal on the remainder, without benefit of
the raised area that is torn off to act as a "stop" for the clamp and
the hose.
--

bcnu - Grungy  (Kailua, HI)  opinions are just that.obviously.
'60 dddPanel '69 Bug '90 Vanagon '93 Eurovan '00 Audi A6 Avant
g r u n g y AT g r u n g y DOT c o m