Date:         Fri, 29 Aug 2003 04:46:29 -0400
Reply-To:     dr <dxrobertson@NETSCAPE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         dr <dxrobertson@NETSCAPE.NET>
Subject:      Re: Temp sensor removal
Content-Type: text/plain; charset=iso-8859-1

i just use a deep-well socket.  i disconnect the wire at the sensor connection, run the wire from the sensor up through the socket and out the square hole in the end of the socket, attach the socket to the sensor, and stuff all the sensor wire down into the socket.  then attach handle and remove.

i have never had any problem getting to it on my 82, cant remember, but i may have removed the spark plug wire and pressure reg vacuum lines, but nothing serious.  it can be siezed sometimes, but i still am able to remove with persuasion, similar to a spark plug.  never broke anything.

dr


ed maikranz <fasteddy64@YAHOO.COM> wrote:

>I am trying to figure out how to remove the temp
>sensor on an 81 air cooled. This is the sensor on the
>head above the #3 cylinder. So far all I have been
>able to do is break the wire off of it. What all will
>I have to remove to get to it? Any other tips ?
>
>Thanks
>Ed Maikranz
>Abilene, TX
>71 Superbeetle
>78 Scirocco
>81 Westy (For Sale)
>
>
>__________________________________
>Do you Yahoo!?
>SBC Yahoo! DSL - Now only $29.95 per month!
>http://sbc.yahoo.com
>

__________________________________________________________________
McAfee VirusScan Online from the Netscape Network.
Comprehensive protection for your entire computer. Get your free trial today!
http://channels.netscape.com/ns/computing/mcafee/index.jsp?promo=393397

Get AOL Instant Messenger 5.1 free of charge.  Download Now!
http://aim.aol.com/aimnew/Aim/register.adp?promo=380455