Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2003, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 5 Sep 2003 14:10:11 -0600
Reply-To:     Bob Stevens <mtbiker62@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@HOTMAIL.COM>
Subject:      Re: leather Vanagon steering wheel from VW?
Content-Type: text/plain; charset="iso-8859-1"

All I know about it is that Ed Rogers of Vee Dub Service, who installed my TIICO, has one on his Syncro. Bob ----- Original Message ----- From: "Jeff Oxroad" <Oxroad@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, September 05, 2003 1:53 PM Subject: leather Vanagon steering wheel from VW?

> I pulled a leather steering wheel from a Carat bus in a wrecking yard > yesterday. Did VW ever offer a leather wheel? > > The part number on the wheel is 255 419 650C The horn button has a part > number 255 419 669 D. Both have a stamped manufacture date of 9/88. > > It looks like the stock US style steering wheel from that era in black as > far > as diameter and shape except that the wheel itself, the part you grip, is > wrapped in leather in the way a leather wheel from a manufacturer would > be. That > is to say the grip is wrapped with a perfectly conforming molded leather > and a > seem on the interior side of the wheel and a kind of complicated X shaped > stitch holding it in place. The stitch is the same as on other VW leather > wheels > I have seen. The wrap conforms to all the finger grip nubs on the wheel on > the inside of the wheel. > > It's not simply a wrap like a wheelskin brand because it actually > continues > over and covers part of the center steering wheel spoke or beam with the > leather covering the spoke until it meets the horn button. The spoke has > a recessed > portion to accomodate the leather and allow it to fit flush on the spoke > once > the leather was installed. The horn button is covered with black naugahide > giving it a slight padding. The naugahyde has two plugs with the picture > of a > horn at each side to denote it is the horn and the VW in the circle in the > middle is a plastic plug the same size as on stock wheels. > > And again it looks to be a factory type leather wrap as the stitching and > the > fact that the leather molds over the spoke on each side makes it much more > than a standard after-market wrap. The wheel is stamped with GERMANY as > the > manufacturing plant. > > This wheel is different than the South African leather wheels I have, > although the SA wheel I have is from the late 90s. And although the late > 90s SA wheel > is a differnt shape than the 88 wheel I found the leather wrapping does > share > similarities. And the black leather SA wheel I have has a part number with > the suffix C. The number of the SA wheel is 22S 419 091 C. > > Anybody have any info on such a wheel? > > Best > Jeff > 83.5 Westy > LA,CA >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.