Date:         Thu, 11 Sep 2003 08:49:48 -0700
Reply-To:     Malcolm Stebbins <mwstebbins@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Malcolm Stebbins <mwstebbins@YAHOO.COM>
Subject:      Re: Any tricks to removing sliding door rail cover?
Comments: To: Gerry Burns <gerry@EDWARDBLACK.COM>
In-Reply-To:  <004501c37875$006a9e80$4a02a8c0@Belkin>
Content-Type: text/plain; charset=us-ascii

--- Gerry Burns <gerry@EDWARDBLACK.COM> wrote:

> , I was unable to remove the rail
> cover. Tried to pop it off several different ways
> but stopped short in fear of inflicting damage.

I just took mine off today.  On my 91 CDN model, There
is a screw in the back - under the panel where the
door holder slides - and a screw in the front - same,
under the panel where the door holder slides.  Then
the panel  just slides straight up (one needs to pull
the bottom out to cleanr the screw brakcets). Try
putting some oil down the panel seam from the top.  I
can send digi-pics if you desire.

> How to operate the rear windshield wiper and washer?

Is it pushing the washer stick (on the steering wheel
column) forward????

> n       How to reset clock?

Two tiny holes below/under the clock face one for
minutes and one for hours.  Push and hold.  Sometimes
the dimples get caught in the 'in' position and the
clock keeps cycleing,  for that one must take the
instrument panel off and remove the clock.

> Why the passenger side rear view mirror does
> not adjust so the driver can use it?

With the power mirrors, There is a way to remove the
mirror (tongue/tab rotates in behind mirror) and then
one can break off the stops to allow the mirror to
adjust more.  Its covered in Bentley I think. Malcolm

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com