Date:         Tue, 9 Sep 2003 20:30:53 -0500
Reply-To:     Brett Baer <brettbaer@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Brett Baer <brettbaer@HOTMAIL.COM>
Subject:      Re: Front heater core removal reference from archives
Content-Type: text/plain; format=flowed

The "round nuts", or shear bolts, that hold the steering column to the dash
can easily be removed with a pair of vise grips, no drilling needed.  If
this is the most difficult part of the job, the whole deal should be a
breeze.  I did the job about a week ago, and used an old post from the
archive as a guide.  I found it very helpful.

The link to this post is:

http://gerry.vanagon.com/cgi-bin/wa.exe?A2=ind0111D&L=vanagon&D=0&P=34628

Hope this helps, it difinitely helped me.
Good luck,
Brett Baer
'87 Syncro Westy
Austin, TX


>From: zolo <zolo@FOXINTERNET.NET>
>Reply-To: zolo <zolo@FOXINTERNET.NET>
>To: vanagon@GERRY.VANAGON.COM
>Subject: Re: Front heater core
>Date: Tue, 9 Sep 2003 10:54:48 -0700
>
>I always managed to grip those round nuts and turn them out with a vice
>grip.
>Zoltan
>----- Original Message -----
>From: "John Runberg" <jrunberg@MAC.COM>
>To: <vanagon@GERRY.VANAGON.COM>
>Sent: Tuesday, September 09, 2003 10:30 AM
>Subject: Re: Front heater core
>
>
> > Helped a friend do this on his van last year. The biggest thing is that
>the bolts which hold the steering column in place must be drilled out. He
>did this previously so it only took the two of us a couple hours this time
>around. The first time around may take longer.
> >
> > john

_________________________________________________________________
Get 10MB of e-mail storage! Sign up for Hotmail Extra Storage.
http://join.msn.com/?PAGE=features/es