Date:         Thu, 11 Sep 2003 10:55:54 -0400
Reply-To:     vw4x4@FYI.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Zeno <vw4x4@FYI.NET>
Subject:      Re: '87 Front Disk Brakes-
Comments: To: "Koontz, Mark" <Mark.Koontz@HARLEY-DAVIDSON.COM>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Reality  is a one piece cast with front hub, on the 2 wheel drive.
Syncros have a bolt on, (or in my case rust on) rotor, to the hub.
If you have a Syncro these may look pressed on, but are not.

                                                      ERic

Koontz, Mark wrote:

>Hi all-
>
>I've been working on my "rusty" brakes and talked to a shop about turning them.
>They said they don't like turning solid disks... They'd replace them.
>I said it looked (to me) like it was a 1 piece casting with the front wheel hub.
>They said is was a "press off."
>
>What is reality here?
>
>
>Thank you very much,
>Mark P Koontz
>Senior Designer (Contract)
>   414-465-6351
><º)))>{
>
>
>
>