Date:         Fri, 12 Sep 2003 16:50:56 -0700
Reply-To:     Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Subject:      Re: oil filler tube removal
Comments: To: Owen <olists@THEBRANDS.ORG>
In-Reply-To:  <045801c37984$7d199b60$0601020a@owenlt>
Content-Type: text/plain; charset="US-ASCII"

Take it off in one piece - it's pretty easy.  It's held on with two 13mm
nuts.  You'll also need to loosen the dipstick holder from the pipe.

Karl Wolz

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Owen
Sent: Friday, September 12, 2003 4:21 PM
To: vanagon@GERRY.VANAGON.COM
Subject: oil filler tube removal

I need to remove the oil filler tube to gain access for the dreaded
drilling of the alternator mounting bracket. The top half is plastic.
Can this slide off or do I have to unbolt the whole assembly at the
block.

Though it wiggles some I am hesitant for fear of breaking it and having
to buy another.

The Bentley doesn't offer much guidance on this.

Owen Brand