Date:         Sun, 14 Sep 2003 06:18:12 -0400
Reply-To:     Ken Lewis <kdlewis_wasting_time@ACCESS4LESS.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ken Lewis <kdlewis_wasting_time@ACCESS4LESS.NET>
Subject:      Re: Idle stabilizer question...
Comments: To: Jesse and Monica Johnson <jjmojo@SUSCOM.NET>
Content-Type: text/plain; charset="iso-8859-1"

Jesse;
    Check it again. Another listee made the statement he has been driving
without the Idle Control Module plugged in (which, I believe, controls the
buzzing) .
    The engine on my 86 would not hold an idle when I tried it.

Ken Lewis
86 Transporter Crew Cab
60 356 T-5 Porsche
http://neksiwel.20m.com/
Vanagon tech, pixs, O2 monitor gadget
----- Original Message -----
From: "Jesse and Monica Johnson" <jjmojo@SUSCOM.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, September 13, 2003 6:32 PM
Subject: Idle stabilizer question...


> Hello Everyone,
> When i was swapping out my throttle position switch...i noticed that my
> idle stabilizer valve was not humming....so i checked the terminals and
> there is continuity as per the bentley...but i am not getting a signal
> to the stabilizer...any advice on what to look for?
> thanks everyone,
> jesse
> 89 carat...just keeps needing me more and more...