Hi Jesse I have a Westy 87 (also digifant) and I have used a 3mm Allen key to loose the screw on the left side and a 1/8" Allen key to adjust the throttle gas switch with the screw on the right. You can see the left screw moving when you do the adjustement with the right screw. Hope I am clear enough. Good luck Germain ----- Original Message ----- From: "Jesse and Monica Johnson" <jjmojo@SUSCOM.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, September 15, 2003 7:05 PM Subject: What size allen wrench is used for throttle body switch?
> Hey all, > what is the size allen wrench needed to adjust the throttle body > switch? this is for a 89 carat with digifant. > thanks, > jesse > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.