I think that this may have been addressed some time ago, but at the time I didn't realize that I had a problem. My front doors seem to lock just as they should, but neither the sliding side door nor the rear hatch will lock when the front door locks are activated by the key. I opened up the switch connection on the passenger-side pillar. There are 4 connections, but mine only had wires leading to three: the top, the top-middle, and the bottom connections. There appeared to be only these three wires in the harness leading to the switch. Before I discovered this, I had been installing wiring in that pillar to run an extra lamp, and to run a permanently mounted fan. My concern is that in the process I might have somehow pulled the connecting wire off of that lower-middle connection, and that it is now somehow stuck up in the pillar, somewhere. However, this would not readily explain why the rear hatch automatic locking would not be working. Any thoughts or suggestions would be appreciated. Fin Beven '90 Carat, Camper conversion. Pasadena, CA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.