Date:         Thu, 18 Sep 2003 07:11:39 -0400
Reply-To:     Greg Marshall <earthboy@ROGERS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Greg Marshall <earthboy@ROGERS.COM>
Subject:      Temperature Sensor Resistance in AFM
Content-Type: text/plain; charset=us-ascii

Hi folks,

My van has been a bit hard starting lately, so I went at it with my
multimeter today to try and track down any problems.  What I found was
that the resistance across the Temperature Sensor (the one in the AFM)
was only 1300.  Bentley spec is 2300 - 2500.  Could this be causing my
rough start and slight lack of driving power problem?  If so, is
replacing the entire AFM the only option for fixing the problem?
Finally, if I do that, how do I set the CO adjust screw?

Thanks,

Greg.
82 vanagon

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.