Date:         Tue, 23 Sep 2003 19:28:53 -0700
Reply-To:     laurasdog@WEIRDSTUFFWEMAKE.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Delanty <laurasdog@WEIRDSTUFFWEMAKE.COM>
Subject:      Re: Removing Oxygen Sensor tips needed,
              broken O2 sensor cause backfire?
In-Reply-To:  <2b.481f4c23.2ca1bbb1@aol.com>
Content-Type: text/plain; charset="us-ascii"; format=flowed

>
>Andy, you might be able to install a threaded insert or Heli-Coil.  If you
>have any luck at all, the thread size of the OXS will be commonly available.

It's the same threads as 18 mm spark plug. (nearly all threaded O2
sensors are 18mm)
O2 sensor bungs are available from any decent speed shop, ready to
weld into custom exhaust systems.

Steve
EJ22 -> '86 Westy "Escape Pod"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.