Date:         Mon, 22 Sep 2003 10:31:12 -0700
Reply-To:     "Scott W." <smorewhisky@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Scott W." <smorewhisky@YAHOO.COM>
Subject:      Re: flywheel locker? thanks!
Comments: To: mike boland <westy@mvboland.com>
In-Reply-To:  <5.2.0.9.2.20030921111544.00b850f0@pop.everyone.net>
Content-Type: text/plain; charset=us-ascii

that will work just fine, now to find that buddy you
speak of....thanks


--- mike boland <westy@mvboland.com> wrote:
> Scott
>   not really needed
>
> to remove the bolts place a large screw driver
> between the flywheel teeth
> and engine case stud.. it'll stop flywheel from
> turning while buddy removes
> the 5 bolts that hold flywheel on I've done it many
> times this why
>
> Mike
>
> At 09:00 AM 9/22/2003 -0700, you wrote:
> >going to replace my clutch in a few weeks, am
> trying
> >to get everything together first. lots of stuff in
> the
> >archives about building your own with angle iron,
> and
> >might give that a try. was wondering if anyone knew
> of
> >a place to just buy one, or if making one is really
> >that simple, or if there are other ways to lock
> that
> >sucker up for removal. thanks
> >
> >
> >=====
> >Scott Wilson
> >85 GL Westfalia
> >
> >__________________________________
> >Do you Yahoo!?
> >Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> >http://sitebuilder.yahoo.com
>


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com