Be really careful with tightening the tension nut on these mirrors...the 10mm nut rusts, and breaking the threaded shaft while trying to move the nut is really easy to do. I've done it twice, even after soaking the assembly in penetrating oil, and using wery light pressure on a small 10mm wrench. Bill M 82 GL
-----Original Message----- From: don spence [mailto:dspence@OANET.COM] Sent: September 30, 2003 9:29 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: Tightening Door Mirrors?
Had the Westy out on the weekend, up to Banff for the Melissa's road race (running). On the way up we encountered head and side winds with gusts up to 60-70. Needless to say I did a fair bit of "tacking" to maintain course. Still have the white knuckles. : > Only problem encountered was the drivers side mirror folded back under wind pressure. (100 kph plus the gusts) and now won't maintain position. How do you adjust the tension on these things? TIA Don |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.