Date:         Mon, 29 Sep 2003 09:21:25 -0400
Reply-To:     Michael Vickey <vickrail@VELOCITY.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Vickey <vickrail@VELOCITY.NET>
Subject:      Re: 2.1 fuel injection problem

Frank,

I think Dennis is right about the solution to your problem.

To elaborate, the ground wire in question may or may not terminate on the
oil breather housing. To locate this wire, you can trace it - it is a
brown wire that comes out of the small wire sheath that contains the wires
for the Hall Sender. Loctate this wire and clean it's connection. If it
terminates on the oil breather housing, move it to a bare metal location
somewhere else on the engine.

Please post your results.

Michael
Personal VW web page:
http://www.velocity.net/~vickrail/moshevw.htm

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.