Date:         Mon, 6 Oct 2003 13:16:35 -0500
Reply-To:     Andrew Gies <andrew_gies@CANGENE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Andrew Gies <andrew_gies@CANGENE.COM>
Subject:      air intake question
Content-Type: text/plain; charset="iso-8859-1"

My van has aftermarket cruise control, that was installed in the area where
a hose attaches the air cleaner to the fresh air "snorkel".  I figure from
the looks of the cruise installation one of the POs of the van did it
themselves (very ugly).   To make more room for the installation, this guy
simply cut the hose off, and currently the air cleaner is being supplied
with "hot" air directly from the engine compartment.

So I have two questions:
- is it potentially detrimental to the engine to be running under these
conditions?  I realize that "cold" air provides more power than "hot" air -
anything beyond this?

- is there a specific part that I can get to replace the hose, or will any
appropriately sized flex hose work?

Any comments on this would be appreciated.

Andrew


*******************************************************************
CONFIDENTIAL - This e-mail transmission and any documents attached to it may
contain information that is confidential or legally privileged. If you are
not the intended recipient, or a person responsible for delivering this
transmission to the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or use of this transmission is strictly
prohibited.  If you have received this transmission in error, please
immediately notify the sender and destroy the original transmission,
attachments, and destroy any hard copies.