Date:         Thu, 16 Oct 2003 23:46:15 -0400
Reply-To:     Kim Brennan <kimbrennan@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kim Brennan <kimbrennan@MAC.COM>
Subject:      Re: SA center alloy caps
In-Reply-To:  <1a9.1b65cc9c.2cc078f1@aol.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed

Yah, in this Chris is, unfortunately, wrong. The standard alloy caps
will fit, but very loosely. The SA caps look very much like the
standard alloy caps, but they are different..

The Stock alloy cap is VW/Audi part number 251 601 172 while the SA cap
is "22S 601 171A" (according to the sticker which also mentions Baires
Plastics, and yes that is a distinct "S" not a "5".

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.