hey, I have been helping a friend in the cold rain and snow here in VT with his van. He has no spark from coil. so we checked the hall sender (replaced recently, by one of the POs). Anyway I proceeded to check for the required minimum 10volt signal from the ecu at the hall efect sender wires and I had nothing, now the bentley says "replace ECU" in this instance. NO problem, Done< I have three good ones. NOPE this aint workin dude. SO Me thinks that we need to replace the wiring harness or chase the wires till we find the short or broken wire. ANy input? previous experience not neccessary. Thanks Chris VT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.