My thanks to all who have responed with suggestions about vacuum forming vanagon parts. These I deas will be studied to see what can be done. There may be some adaptations and/or variations but I will look at the possibilities. Thanks again. Regards, John Rodgers 88 GL Driver. John Rodgers wrote: > It seems I have come into possession of a big vacuum forming machine > that can handle materials to 1/4 inch thick, and can vacuum forms 24" > wide, 36 " long, 2 " deep. > > If anyone has any ideas of things to use or produce with this machine, > particularly things for Vanagon based vehicles, I would like to hear > from you. > > Thanks, > > John Rodgers > 88 GL Driver > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.