Date:         Fri, 7 Nov 2003 11:31:03 +0100
Reply-To:     Raimund Feussner <rfeussner@GMX.DE>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Raimund Feussner <rfeussner@GMX.DE>
Subject:      Re: Audi V6 in a Vanagon?
Comments: To: Ki <ki@CLOUDFACTORY.ORG>
Content-Type: text/plain; charset="iso-8859-1"

Once again, thatīs me. The relitechpage is just the U.S. mirror of my first
site. Hereīs the post again:
Raimund Feussner <rfeussner@gmx.de> wrote:
  Hi Guys,

  I am that "mysterious" German who did the conversion. I did it in 1998
with
  the 12Valves Audi V6 (174hp). The photo is taken from my homepage
  http://kfz.freepage.de/rfeussner
  The page is also mirrored on volksweb/relitech.

  In 2000 I upgraded to the new 193hp 30Valves V6. This can bee seen on
  www.vwbus-online.de/feussner

  Finaly, I finished the last conversion, another 193hp 30V with its 5speed
  auto gearbox (tiptronic version) in my friend crewcab. This can be seen
  (without technical detail photos yet) on
  www.vwbus-online.de/feussner/mittelmotor.htm
  The crewcab version is a mid-engined car because of the use of the Audi
  transmission.

  No, I am no Professional, I did all these things as hobby!

  Last but not least I engineered a 4disc brake system with only stock
VW/Audi
  parts (rotors, calipers etc.), www.vwbus-online.de/feussner/bremse.html .
  The setup is finished now, but the photos were taken during raw-status
  development.
  You can see a bit of the finished brakes on the mid-engine page.
  I am selling this kit for 1960Euro here in Germany. I have no clue about
  trading with the U.S./canada, but would happily get in conntact with,
  perhaps, David Marshall?

  Raimund



----- Original Message -----
From: "Ki" <ki@CLOUDFACTORY.ORG>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, November 06, 2003 1:48 AM
Subject: Re: Audi V6 in a Vanagon?


> yes i5's.
>
> here's a link i found for a guy who's done a v-6 conversion.
>
> http://volksweb.relitech.com/rfeussner/bushomeeng.htm
>
> On Fri, 31 Oct 2003, Ben T wrote:
>
> > In a message dated 10/30/03 3:54:02 PM Pacific Standard Time,
> > ki@CLOUDFACTORY.ORG writes:
> >
> > << not sure about a v6 but there's a guy in livermore ca doing v5
> >  conversions.  pretty pricey tho' last time i checked with him.
somewhere
> >  around 8-9k.  detlef hanske i think is his name but can't remember his
> >  shop's name.  someone on this list referred me to him not sure if they
are
> >  still on here. >>
> >
> > Last time I looked, Detlev was doing inline-5 Audi conversions -- not
V5's.
> >
> > benT
> >
>
>