Hi folks. I discovered today that my passenger side high beam is not working. The low beam is still workign fine. Assuming it was the bulb, I bought a new one to replace it. The new bulb went in, and still no light. Checking the voltage with the high beam switch on, I get just under twelve volts at brown and white on the socket. With the low beam on, I get just under 12 volts at brown and yellow. If I have voltage at the socket, and a working light, how come it's not coming on? The connections are all clean, and I'm stumped. Greg 82 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.