Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2003, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 10 Nov 2003 08:51:44 -0800
Reply-To:     Matthew <poll7356@UIDAHO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matthew <poll7356@UIDAHO.EDU>
Subject:      Re: vibrating tiico engine
Comments: To: Chris DeLong <green536@hotmail.com>
In-Reply-To:  <Law15-F60GrGObo7bkx0001105c@hotmail.com>
Content-type: text/plain; charset=us-ascii; format=flowed

you don't have to remove the timing belt, as there is plenty of room to slip the bracket in there and put the bolt on. the tiico block is a 1.8 block if that is any different that an ABA.

Chris DeLong wrote:

> Lets not forget to remind people that if you are going to use a v-belt > setup from a golf/rabbit/jetta/scirocco/fox/whatever that the timing > belt and intermediate pulley will need to be removed to attach the > bracket at the head. > > With a serpentine belt setup, you do not have to do this. Pics will be > up on the site near the end of next week detailing what I refer to as > the Tiico Deluxe :) Very nice and clean when done right and vibrations > are gonzo. > > > > Chris DeLong > Fine Tuning > 206.367.5503 > www.finetuningperformance.com > Seattle, WA USA > > > > > >> From: Matthew <poll7356@UIDAHO.EDU> >> Reply-To: Matthew <poll7356@UIDAHO.EDU> >> To: vanagon@GERRY.VANAGON.COM >> Subject: Re: vibrating tiico engine >> Date: Fri, 7 Nov 2003 17:03:00 -0800 >> >>> Lastly, we didn't reattach her A/C compressor. I am >>> not sure which brackets to use if you intend on making >>> this work. Further (Matt correct me if I'm wrong) you >>> may have to use the Jetta/golf compressor (so it fits >>> the bracketry and location correctly). >> >> >> the older a2 brackets w/o ac work great. If you have ac you need a >> bracket that is made for ac. She doesn't want ac so she went with an 86 >> jetta bracket. The vanagon compressor fits the g/j brackets, but you'll >> need to have some more hoses manufactures. >> >> I have the part #'s for the high pressure hose fittings for the ps pump >> by the way. >> matthew > > > _________________________________________________________________ > Frustrated with dial-up? Get high-speed for as low as $26.95. > https://broadband.msn.com (Prices may vary by service area.) > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.