Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2003, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 22 Nov 2003 02:57:40 +0000
Reply-To:     Chris DeLong <green536@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris DeLong <green536@HOTMAIL.COM>
Subject:      Re: 88 thermostat leak
Comments: To: mikeped@SHAW.CA
Content-Type: text/plain; format=flowed

Ok well just to give you some insight, the VW spring clamps are better than the screw type clamps in two ways. 1. the screw clamp cuts into the hose eventually. 2. the spring clamp expands and cotracts, thus allowing maximum clamping force without shortening the life of the hose.

But I will admit that removing and installing the spring clamp can be a bitch if you dont have the sepcial tool. On that same note; with the special tool it takes less time to remove the clamp and it doesnt have a problem with the screw seizing.

The o-ring goes on top :)

Chris DeLong Fine Tuning 206.367.5503 www.finetuningperformance.com Seattle, WA USA

>From: Mike Pedersen <mikeped@SHAW.CA> >Reply-To: Mike Pedersen <mikeped@SHAW.CA> >To: vanagon@GERRY.VANAGON.COM >Subject: 88 thermostat leak >Date: Fri, 21 Nov 2003 17:34:28 -0800 > >I just changed out the waterpump on an '88 automatic. Also changed some >hoses, t-stat, and both temp senders. Upon startup, the waterpump to >thermostat housing hose was leaking. Fixed that with some "real" stainless >steel Tridon hoseclamps, not the useless green VW ones. It was also >leaking at the joint at the t-stat housing body to housing top. There was >not an o-ring in there when I took it apart, but a little geeking around on >the net indicates that one (or two) should be present. I know it's a ~$1 >part, but no, I'm not going to buy one from the local VW parts department >or list vendors, since time is of the essence. ( I live in an place where >it takes two ferries to get here, and there ain't no local VW dealer.) Can >someone tell me if the ring goes on the top or bottom of the t-stat. My >guess is top. If any one has a spare (034 121 119) could you tell me what >the I.D and thickness is? Also if there are any painted coloured bands on >it. (This may help indicated o-ring material, buna or nitrile). > >Thanks, > >Mike Pedersen >Powell River, BC

_________________________________________________________________ Gift-shop online from the comfort of home at MSN Shopping! No crowds, free parking. http://shopping.msn.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.