----- Original Message ----- From: "Tim Beidel" <tbeidel@MAINE.RR.COM> > > 1. How do I remove the window crank? > The cover peels back by hand from the attachment end, and a phillips-head screw is exposed. > 2. Are there any other impediments to removing the panel once the crank and handle are removed? (I do not have the armrest that shows up in Bentley > diagrams.) > Maybe the latch cover plate. I can't remember if it comes off with the panel or not. Any closing handle will likely have to come off also. I think my panels are held in by metal clips. There are some special interior service tools available to help it go smoothly; usually sort of like a two-pronged fork for prying. If you just start pulling the cardboard may tear where the clips mounts. > 3. Once the panel is off, do I have to remove the plastic film that protects > against moisture? If so, can I reattach the same piece of film? With what > type of glue? > I doubt there's anything specific. Pull it away where you need to access the parts in question. The stickum might still hold upon reinstallation. Probably an interior tack adhesive would do, as well. Jon Schaer Columbus, OH 85 GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.