Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2003, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 28 Nov 2003 10:02:25 -0600
Reply-To:     VWNut Hawk <vwnut@HAWKCOMPUTING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         VWNut Hawk <vwnut@HAWKCOMPUTING.COM>
Subject:      Re: 84 manual transmission - pops out of 4th
Comments: To: kdlewis_wasting_time@access4less.net
Content-Type: text/plain; charset=US-ASCII

I tightened the horizontal transmission mount bolt and it is better but it still popped out of 4th when I was heading into a wind.

I will order the bushings and see if they help.

Thanls for the reply.

>>> "Ken Lewis" <kdlewis_wasting_time@access4less.net> 11/27/2003 1:25:09 PM >>> John, Don't freak, yet. Fix what you know for sure is worn. Do the cheap parts first. They have to be done eventually. Ken Lewis 86 Transporter Crew Cab 60 356 T-5 Porsche http://neksiwel.20m.com/ Vanagon tech, pixs, O2 monitor gadget ----- Original Message ----- From: "VWNut Hawk" <vwnut@HAWKCOMPUTING.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, November 27, 2003 8:35 AM Subject: 84 manual transmission - pops out of 4th

> I'm getting ready to do so searches on the list but here's what is > happening. > > I have a 84 manual with a 2.1 rebuilt in it. > > Last night while driving 65mph it pops out of 4th gear. I put it back > and run a > while. It pops out again. Slowing down and accelerating seems to make > it pop out. > > There is movement in the shifter if the whole transmission and engine > move > slightly when accelerating or slowing. > > Maybe I need a new transmission mount. > > I have all new engine mounts less than a year old. > > I think the bushings around the shifting rod next to the transmission > are worn out. > > No other noises, no hard shifting. Clutch, pilot bearing etc seem > fine. > > Last weekend I bled the brakes and put new hand brake cables on. > > Is this the 3/4 slider gear problem? If so were should I order a > rebuilt transmission from? > > Honestly this is a kick in the pants. I have been making an effort to > get as many of my > buses in the best shape possible and this is going backwards. > > (moral support plea.) > > John.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.