>>>On a 91 2.1 which way is the thermostat housing bleeder screw closed? Clockwise or CounterClockwise? I just replaced a hose and need to bleed the system. I messed with the valve and can't remeber which way it was.<<< Clockwise is close, the bleeder screw won't come out completely, it as 2 small tab to keep this one from falling down. I found out that the bleeding hole is sometime pertially clog, so for a better bleeding i removed the 2 tab and i completely remove the bleeding screw. Just a suggestion! http://www.benplace.com/engine/temp_sender_2.jpg |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.